Future Oils multioil burners will burn nearly all animal, vegetable, waste and mineral oil. These are a cheaper alternative to other multifuel burners on the market but maintain high quality through European CE certification and can be fitted to most warm air heaters and hot water boilers. Our burners will also accept gas oil, kerosene and even waste engine oil but we are keen to promote the use of cheaper biofuels which are cleaner, locally available and can be delivered to your door. Due to the higher density of vegetable oil the volumetric content of heat value is similar to regular heating oil. Combustion of these fuels result in a 55% decrease of carbon monoxide making it a much safer alternative to mineral oil. The use of biofuels will help reduce the harmful effects of climate change as these fuels are carbon neutral. Our multifuel burners are available from €2050 and all products come with a 24 month warranty as standard.
Single-segment flame waste oil burner
Technical and performance features:
1. Single-section
operation (on/ off)
2. Can adapt to any type of burning chamber;
3. Mechanical pressure atomization;
4. Through adjusting burning air and combustion head to acheive best
burning parameter;
5. Can directly take off atomization device without disassembling burner
from oven or boiler, convenient to maintain;
6. Automatic temperature controlling box can control temperature automatically
in small oil tank, once reaching fixed temperature, the controlling
part of burner automatically check ignition procedure; independent oil
feed pump;
8. Adopt a flange and an insulation sealing washer to connect to the
oven and boiler and fasten.
Structural features:
The burner includes:
1. Light aluminum alloy fan parts.
2. High-performance centrifugal fan.
3. Burning air inlet with flux regulating device, manual shutdown vent.
4. Slip-on flange matched with various boiler flanges, can adjust the position
that burner extends to heating furnace.
5. Slip-on combustion head with stationary device and steel flame plate.
6. Single-phase motor drives fan and independent oil pump to transport fuels
of different viscidities.
7. With a bobber switch, which controls the oil tank via a solenoid valve
to prevent it from overflowing.
8. Servomechanism and instruction equipment of burner standard.
9. Photosensitive resistance inspects flame.
10. Terminal connecting electric, temperature controller and burner.